DLE60 - 60cc TWIN CYLINDER Aircraft Gas Engine

DLE60 - 60cc TWIN CYLINDER Aircraft Gas Engine

Your Price: $550.00
Out of Stock.
Free Shipping.

Choose Options

Acessories
Falcon 23x8 Beechwood Prop [+$26.50]
Falcon 23x8 Carbon Fiber Prop [+$70.00]
FlowMaster 17 oz. Gas Tank [+$22.00]
RCEXL Opto Kill Switch [+$15.00]

FEATURES

Horizontally opposed twin cylinders for low vibration operation
Aluminum alloy crankcase
Electronic ignition for simpler starts, higher performance and minimal RF noise
Two year limited warranty through DLE-USA from date of purchase


INCLUDES

DLE 60cc Engine
Electronic ignition
NGK CM6 Spark plug
Two Pitts style mufflers
Engine stand-offs


REQUIREMENTS

Gasoline with at least 87 octane rating
2-cycle oil, mix ratio for this engine is 30 parts gas to one part oil and must be followed exactly for warranty consideration and optimum performance
4.8 - 12V battery for ignition (separate receiver style pack can be used) (LiPo & LiFe requires voltage regulator)
Propeller: 22x10, 23x8, 23x10 
Field equipment


SPECIFICATIONS

Displacement*: 61 cc (3.7 cu in)
Bore*: 1.42 in (36 mm)
Stroke: 1.18 in (30 mm)
Weight, engine: 4.37 lb (1.56 kg)
Weight, muffler: 2.82 oz./ 3.00 oz./(80 g/85 g)
Weight, ignition module: 7.44 oz. (211 g)
Output: 7.0 hp @ 8,500 RPM
Static Thrust: 15.2kg Pulling Force/100 meters altitude
13.5kg Pulling Force/1,800 meters altitude
Gasoline/Oil Mixture: 30:1
Gasoline Octane Rating: 87
Recommended Propellers: 22x10, 23x8, 23x10
Carburetor Adjustments;
Low Speed Needle: 1.5 turns out as a starting point, adjust for a smooth idle and a reliable transition to high throttle
High Speed Needle: 1.5 turns out from closed, adjust needle to peak RPM, if engine slows or dies at full throttle, the high-speed mixture is likely too lean
Muffler Length: 5" (128mm)
Muffler Diameter: 2" (50mm)
Exhaust Outlet Length: 3.4" (85.5mm)
Exhaust Outlet Diameter: 0.79" (20mm)
Distance Between Mounting Hole Centers Same Side: 2.7" (69mm)
Distance Between Mounting Hole Centers Opposite Side: 2.7" (69mm)
Width from Cylinder Head to Cylinder Head: 8.5" (215mm)

COMMENTS
To avoid permanent damage to the electronic ignition system, NEVER turn your DLE engine over with the system switched on and the plug not installed.

MANUAL

Recently Viewed Items