Compact size allows these to be used in 60cc airplanes but have a large enough capacity for up to 120cc airplanes. Average flight time with a DA120 is 11 minutes.
Capacity: 32 fluid ounces
Dimensions: Length 8.5” x Width 3” x Height 3”
Weight: 2 ounce
- Crystal Clear
allowing quick visual checks of any possible pollutants in your fuel tank.
- Lightest weight
commercially available R/C fuel tank on the market. Many cases less than
half the weight of the older roto molded “standard” fuel tanks.
- Three line
configuration allowing a dedicated and completely filtered fuel supply
line directly to the carb.
- Filtered clunk
assuring a smooth running engine.
resilient and truly seamless tank body with a threaded on closure
- No rubber
stopper to leak or split your tank apart.
Fourtitude R/C RTU tanks
include: A high quality double sided hook and
loop mounting strap and precut to shape foam mounting pad. Everything you need
to get flying ASAP!
These crystal clear
plastic tanks are square shaped which makes mounting into your aircraft very
simple. Every tank is QC pressure leak tested and are resistant to fuel with up
to 10% Ethanol.
These 32oz tanks can also be used together if 64 oz's are needed. Use part #FORA1005 Tee Fittings 1/8" to plumb them together. Tee each vent line, fill line, and clunk line to each other. Then plumb your lines to the normal locations as if they were off a single tank. If you are using a dual carb engine such as a DA200, then you do not have to tee the clunks. Use one clunk line for each carb. The vent and fill fittings keep the tanks fuel level even during flight. Note this is the only approved method of plumbing two 32oz tanks to work in unison. If you plumb them any other method it will damage the tanks. Yes we have tested this and it works perfectly. In fact Andrew Jesky won the 2011 TAS using this very setup.
IT IS YOUR RESPONSIBILITY TO FULLY SECURE YOUR TANK!