XOAR laminated propellers are only made of the best quality plywood. Each layer is no thicker than 1mm and the best combination of wood and glue ensuring its excellent physical property in minimizing
elongation, breakpoint and distortion rate.
After approving the design in digital imaging, it is transferred
into the CNC manufacturing program where it comes into shape. Each prop is then manually finished to reach
perfect surface smoothness and balance.
During the coating process, 2 layers of primer and 2 layers of
glossy protection are applied in order to prevent corrosion. Once again, each Xoar prop is manually
rebalanced. Spot checks are performed to
each batch by randomly selecting props to be put on an actual engine for
rotating balance and quietness.
balance check is still recommended before flight.
SHAFT DIAMETER IS 10MM